Symbol LS7708 - Low Power Mode

4 - 8 LS7708 Scanner Product Reference Guide
Low Power Mode
After a period of inactivity, the scanner enters a reduced power mode. This parameter controls how aggressively power is
conserved, and therefore determines the method of waking the scanner up.
Low Power Blink
Selecting Low Power Blink Mode causes the scanner (after a period of inactivity) to blink the laser infrequently to save power.
The green LED remains lit. To restore the scanner to full power mode, present a bar code.
*Low Power Blink Mode
Motor and Laser Shut Down
Selecting Motor and Laser Shut Down causes the scanner (after a period of inactivity) to turn off the motor and laser. The red
and green LEDs remain lit. Depress the Volume Control and Wakeup button (see Figure 1-1 on page 1-2) to awaken the scanner
to its full power mode.
Low Power Motor and Laser Shut Down