Symbologies 13 - 57
Set Lengths for Code 93 (continued)
Length Within Range - This option allows decoding of a Code 93 symbol with a specific length range. The length range
is selected from numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar Codes. For example, to decode Code
93 symbols containing between 4 and 12 characters, first scan Code 93 - Length Within Range. Then scan 0, 4, 1, and 2
(single digit numbers must always be preceded by a leading zero). If an error occurs, or to change the selection, scan Cancel on
page D-6.
Code 93 - Length Within Range
Any Length - Scanning this option allows decoding of Code 93 symbols containing any number of characters within the scanner’s
capability.
Code 93 - Any Length
To Next Page
Loading...
