13 - 60 LS7708 Scanner Product Reference Guide
Set Lengths for Code 11 (Continued)
Length Within Range - This option allows decoding of a Code 11 symbol with a specific length range. The length range
is selected from numeric bar codes beginning on page D-1 in Appendix D, Numeric Bar Codes. For example, to decode Code
11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within Range. Then scan 0, 4, 1, and 2
(single digit numbers must always be preceded by a leading zero). If an error occurs, or to change the selection, scan Cancel on
page D-6.
Code 11 - Length Within Range
Any Length - Scanning this option allows decoding of Code 11 symbols containing any number of characters within the scanner
capability.
Code 11 - Any Length
To Next Page
Loading...
