SSSSSSSSSSS SSSS S SSSSS SSSSSSS S SSS S SSSSS S
4
152 TimeSource 3100
TL1 Reference
097-72020-01 Issue 9: November 2003
Retrieve Communication (cont’d)
The parameters which may be displayed in the <spec_block> are listed below.
Parameter Value Description
MONMSG=a a = ALW View messages from all ports
a = INH View messages from this port only
KEEPALIVE=a a = 1 to 255 Inactive minutes until the unit sends a
COMPLD message to keep the connection
from being closed
a = 0 No COMPLD message is output
ENDOFTEXT=a a = 1 to 9F Hex code at end of all responses
a = 00 No hex code at end of responses
ECHO=a a = ALW Echoes characters received so they appear
on the user's screen as typed
a = INH Local echo is disabled
COMPRI=a a = ALW0 TL1 commands and responses, no
autonomous messages sent
a = ALW1 TL1 commands and responses, sends
autonomous messages
a = ALW2 TL1 commands and responses, sends
autonomous messages whether or not
logged on
a = INH Closes connection, logs off a user (if logged
on), and keeps port from use (a port cannot
close itself)
To Next Page
Loading...
Need help?
General
