2 Safety
2.1 Intended Use
The system is intended for the industrial market. Therefore, the CyFlow™ Cube 6 V2m is
a device, which is not for use in diagnostic procedures. The CyFlow™ Cube 6 V2m
provides the basis for the following applications:
• Microbiological analysis;
• Fermentation control;
• Bead-based assays for research purposes;
• Particle and cell concentration analysis based on True Volumetric Absolute
Counting;
• Particle size and fluorescence distribution analysis.
2.2 Prohibited use
Never use the system with organic solvents as this can destroy the fluidic system. Only
use particles with a diameter < 100 μm. It is recommended to use Sysmex Partec
accessories and consumables only.
Never for use in diagnostic procedures. Not for use with biohazardous substances.
2.3 Reasonably foreseeable misuse
Only use this device as a sensitive measuring device.
• Do not use as personal computer.
• Do not use with chemicals harmful to the device (household sanitisers etc.).
• Do not place any objects on top of the CyFlow™ Cube 6 V2m.
2.4 User definition
The device may only be used by personnel properly instructed in its handling. The
manufacturer, authorised distributor or a person authorised by the operator (and trained
by either the manufacturer or an authorised distributor) must provide instruction in
handling the device with the help of this Operating Manual.
The device is aimed for a large spectrum of users, from beginners to experts. In the best
case an expert is around – so, if you are a beginner, let her/him help you.
Access to the device is not permitted to insufficiently qualified personnel.
2.4.1 User qualification groups
Instructed personnel
Instructed personnel have to be trained by qualified personnel or personnel authorised by
Sysmex to operate the device within the scope of the intended use. They have to be able
to assess if the device can be safely used and are proficient in handling hazardous
substances.
To Next Page
Loading...
Need help?
General
