SYSMEX CyFlow Cube 6 V2m User Manual

6 Operation
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
27
INFORMATION
Gain values
Controls for Gain adjustments are only available at Main User Level or
above.
6.1.5 Analysing a quality check
INFORMATION
FCS Express™ opens automatically once the Quality Check procedure
has finished.
The Quality Check (QC) is analysed automatically by FCS Express™.
Requirements
• The Quality Check has been performed.
Procedure:
1. Switch to FCS Express™. Data is transferred automatically.
2. Enter Quality Check material information for LOT and expiry date.
3. The Quality Check results are analysed automatically.
4. Switch to the Batch tab within FCS Express™ and click [Run].
A PDF report will be generated and saved to C:\Users\Public\QC_Cube 6 V2m. The
filename is “QC_Cube 6 V2m XX” (XX is the date).

SYSMEX CyFlow Cube 6 V2m Specifications

General

Brand	SYSMEX
Model	CyFlow Cube 6 V2m
Category	Measuring Instruments
Language	English