SYSMEX CyFlow Cube 6 V2m - Acquisition

11 Software
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
59
11.5.5 Acquisition
Multiple trigger parameters are logical “OR” connections.
Figure 31: Acquisition register
Property
Description
Light Source
Flags “Laser” […] X selects the active light sources in the device
Trigger Parameter
Flags “FSC”, “SSC”, […], “FL4” select trigger parameters
Gain Settings
The bars set the PMT signal amplification for the individual
optical parameter in voltage (0 – 999 V)
Tresholds
The bars set the cut off level for trigger signals
(left-click shows the cut off level in V)
Fluidics
Flow Rate
Sets the speed of sample flow in µl/s