SYSMEX CyFlow Cube 6 V2m - 11.5 Settings and Measurement Modes

11 Software
50
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
Depiction
Label
Description
Fluid level
indicator
Shows a warning when Sheath
Fluid or waste levels become
critical
Events (/sec)
Displays the flow rate in events
per second
Data (kPart)
Shows total number of
acquired events in kiloparticles
Time (sec)
Shows elapsed time in
seconds
Volume (µl)
Shows measured volume in
microliters
INFORMATION
During automated measure modes, the displayed color in “Volume (µl)”
switches to red as soon as the counting phase begins. For more
information, please refer to chapter 11.5.6 Measure.
11.5 Settings
This is only enabled for Administrators and Main Users.
Click [Settings] within the Acquisition controls to access the Settings.
Fluorescence compensation
Properties of plots and histograms
Calculation with counts of individual regions
Properties of regions
Acquisition controls
Definition of measurement modes