SYSMEX CyFlow Cube 6 V2m User Manual

10 Technical data
40
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
10 Technical data
INFORMATION
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. It has also
been tested and found to comply with the CE directive for Electomagnetic
Compatibility.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions for use, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
10.1 Environmental conditions
Item
Specification
Temperature
Storage and transport: 5 °C to 50 °C
Operation: 15 °C to 30 °C
Relative humidity
20% to 85% relative, non-condensing
Other
no vibrations, no direct sunlight, no direct heat, no smoke,
no dust
Max. altitude
2000 m above MSL
10.2 Device
Item
Specification
Dimensions
Length: 385 mm
Width: 280 mm
Height: 290 mm
528 mm with open display
Weight
18 kg
Power
100-240 V AC
50/60 Hz
120 VA
Mains fuse
T 3.15 A 250 V
Installation / overvoltage
category
2 / II

SYSMEX CyFlow Cube 6 V2m Specifications

General

Brand	SYSMEX
Model	CyFlow Cube 6 V2m
Category	Measuring Instruments
Language	English