SYSMEX CyFlow Cube 6 V2m - 10.3 Optics

10 Technical data
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
41
Item
Specification
EMC class
Class A
Degree of protection
(according to IEC 60529)
IP 20
Noise level
< 80 dBA
Device check
Count Check Beads (low, medium, high)
Calibration Beads 1 µm Concentrate
Calibration Beads 3 µm, ready-to-use
Particle size range
0.1 μm to 100 μm
Maximum data acquisition
speed
15,000 events/s
Acquisition stop time
Event-based, volume-based, time-based
Trigger
On all parameters, on multiple parameters or on
single trigger parameter, selectable in software
Data resolution
16 bit
10.3 Optics
Item
Specification
Laser output
V2m: Blue diode laser: 488 nm 60 mW
Laser class
Laser class I
(Laser class IIIb if device is opened and laser
protection is removed)
Detectors
V2m: 1 to 5 (FSC, SSC, FL1, FL2, FL3)
Filters
Standard setup and filters for FSC, SSC, FL1, FL2, FL3
Optical coupling
Standard objective mount with high numerical aperture
objective
Excitation optics
Elliptical 15 μm × 100 μm at 488 nm