SYSMEX CyFlow Cube 6 V2m - Measure (Sample Port)

11 Software
60
CyFlow™ Cube 6 V2m | Operating Manual | February 2020
11.5.6 Measure (Sample Port)
Figure 32: Measure register
Automatic functions
Property
Description
Autostart
Activates automatic start of acquisition. With each new Sample
tube the next measurement will be started until the [Stop] button
is pressed.
Autosave
Activates automatic data storage at the end of the
measurement.
INFORMATION
Autosave
Autosave does not work, when the measurement is finished by clicking
[end].