Tascam DR-680 - Repeat Activation; Pre-Record Activation; Auto-Record Activation; DIN;MIX Monitor Settings

TASCAM DR-680
19
Low-cut filter
1 When the Home Screen is open, press the HOME/
FUNC key to open the Functions Screen.
2 Use the VALUE knob to move the cursor to select
the item to set.
3 Press the VALUE knob.
When selecting LIMITER or LOW CUT , press the
VALUE knob or 1-6 keys.
4 When you have finished making the settings,
press the HOME/FUNC key to return to the Home
Screen.
Repeat activation
Use the REPEAT item to turn loop playback ON or
OFF. The default value is OFF.
: Repeat playback ON
: Repeat playback OFF
Pre-record activation
Use the PRE.REC item to turn the pre-record function
ON or OFF. The default value is OFF.
: Pre-record ON
: Pre-record OFF
Auto-record activation
Use the A.R E C item to turn the auto-record function
ON or OFF. The default value is OFF.
: Auto-record function ON
: Auto-record function OFF
DIN/MIX monitor settings
When the ST REC item on the REC screen is set to DIN ,
the signal to be monitored can be selected. Press the
VALUE dial to select DIN MON or MIX MON .
The default value is MIX MON .
: Set to monitor the stereo mix
: Set to monitor the digital input
NOTE
When the ST REC item on the REC screen is set to
MIX, this setting is fixed to MIX MON, and it cannot be
changed to DIN MON.
Limiter activation
Use the LIMITER item to turn the limiter function ON
or OFF for each input independently.
The limiter for an input is ON when its number
appears light on a dark background. The default value
is OFF for all inputs.
Press the VALUE knob to turn the limiter ON or OFF
for all inputs at the same time.
Press the 1–6 keys to turn the limiter ON or OFF for
each input independently.
If the limiter has been turned ON for one or more
inputs, the LIMITER indicator appears with a dark
background.
: Limiter ON for all inputs
: Limiter ON for input 1
: Limiter OFF for all inputs
Low-cut filter activation
Use the LOW CUT itemtoturnthelow-cutlterfunction
ON or OFF for each input independently.
Thelow-cutlterforaninputisONwhenitsnumber
appears light on a dark background. The default value
is OFF for all inputs.
Press the VALUEknobtoturnthelow-cutlterONor
OFF for all inputs at the same time.
Press the 1–6keystoturnthelow-cutlterONorOFF
for each input independently.
Ifthelow-cutlterhasbeenturnedONforoneor
more inputs, the LOW CUT indicator appears with a dark
background.
: Low-cutlterONforallinputs
: Low-cutlterfunctionONfor
input 1
: Low-cutlterOFFforall
inputs
NOTE
You can set the cut-off frequency with the FREQUENCY
item of the the LOW CUT menu. (See “Using the low-cut
filter” on page 33.)
2 – Names and Functions of Parts