Tascam DR-680 - Track Arming and Take Naming

TASCAM DR-680
25
6 Press the MENU key to return to the MENU screen.
Press the HOME/FUNC key to return to the Home
Screen.
Setting the sampling frequency
You can set the sampling frequency and record BWF
andWAVlesat44.1,48,96or192kHz.
1 Press the MENU key to open the MENU screen.
2 Use the DATA wheel to select the REC menu item,
and press the ENTER key to open the REC screen.
3 Use the DATA wheel to select the SAMPLE item,
and press the key or ENTER key.
4 Use the DATA wheel to select one of the following
options: 44.1kHz (default value), 48kHz , 96kHz ,
or 192kHz .
NOTE
When the file format is MP3, 96 kHz and 192 kHz cannot
be selected.
5 Press the key to return to the selection of
items on the REC screen.
6 Press the MENU key to return to the MENU screen.
Press the HOME/FUNC key to return to the Home
Screen.
Setting the file recording mode
Thelerecordingmodecanbesettoamonauralle,a
stereoleora6-channelle.
1 Press the MENU key to open the MENU screen.
2 Use the DATA wheel to select the REC menu item,
and press the ENTER key to open the REC screen.
3 Use the DATA wheel to select the FILE item, and
press the key or ENTER key.
4 Use the DATA wheel to select one of the following
options: MONO , STEREO (default value), or 6ch .
NOTE
When set to MONO, a mono file is created for each
•
recorded track. When set to STEREO, a stereo file
is created for each pair of tracks (1-2, 3-4 and 5-6).
When set to 6ch, one 6-channel file is created for
tracks 1-6.
6ch cannot be selected when the file format is set to
•
MP3 or the sampling frequency is set to 192 kHz.
5 Press the key to return to the selection of
items on the REC screen.
6 Press the MENU key to return to the MENU screen.
Press the HOME/FUNC key to return to the Home
Screen.
Stereo track recording settings
You can set what is recorded on the stereo track.
1 Press the MENU key to open the MENU screen.
2 Use the DATA wheel to select the REC menu item,
and press the ENTER key to open the REC screen.
3 Use the DATA wheel to select the ST REC item, and
press the key or ENTER key.
4 Use the DATA wheel to select one of the following
options.
MIX (default): Record a mix of the 6 inputs on the
stereo track.
DIN :
Record the signal from the DIGITAL/
SYNC IN input jack on the stereo
track.
5 Press the key to return to the selection of
items on the REC screen.
6 Press the MENU key to return to the MENU screen.
Press the HOME/FUNC key to return to the Home
Screen.
Arming and disarming tracks for recording
Tracks can be armed and disarmed for recording from
the MENU screen.
1. Press the MENU key on the top panel to open the
MENU screen.
4 – Recording