6. STANDARD BOLT TIGHTENING TORQUE
See the bolt torque charts on page 1-22 to 1-25 for the torques of standard bolts when they are used for
general applications. Refer to the Shop Manual and Service Manual of your truck model when:
1) Special nuts are used.
2) Synthetic resin or rubber is used for tightening.
3) Specied tightening torque is given.
• Division by strength
Strength Indication on bolt Material
4.6
SS400
(The number may be omitted.)
6.8 S45C
8.8
SCM435
Boron steel
(“B” may be omitted.)
10.9
SCM435
Boron steel
(“B” may be omitted.)
To Next Page
Loading...
