TCM FD35C9 - 1.3 List of Lubricants and Their Specifications

1-26
1.3 LIST OF LUBRICANTS
CAUTION
· Do not mix lubricants of different brands; otherwise the performance of the lift truck might be
adversely affected.
· Use API Class CD or higher engine oil (Lub Life S-3, X-3) for the crankcase of a turbocharged
engine.
· Use diesel fuel for the diesel engine; otherwise the engine might fail to operate normally. It is
recommended to use JIS No.2 diesel fuel under general temperature conditions.
Location
Lubricant
to be used
Grade of viscosity
Prevailing ambient
temperature
Engine crankcase Engine oil
TCM Lube Life C-1 -25°C to 35°C [ -13°F to 95°F]
TCM Lube Life S-3 0°C & above [32°F & above]
TCM Lube Life X-3 0°C to -25°C [32°F to -13°F]
Hydraulic oil tank Hydraulic oil
TCM Hydraulic Oil
(wear resistance type)
-25°C & above [-13°F & above]
Automatic
transmission
Engine oil
TCM Lube Life X-3 -25°C & above [-13°F & above]
TCM TorCon Oil -45°C & above [-49°F & above]
Manual
transmission
Gear oil TCM Gear Oil
Drive axle Gear oil TCM Gear Oil Speciedoil
Grease ttings Grease TCM lithium-based oil -25°C & above [-13°F & above]
Radiator Coolant TCM Long Life Coolant 50% or higher concentration
Fuel tank
Diesel fuel
JIS No.2 (Flow point: -10°C [14°F]) -5°C & above [23°F & above]
JIS No.3 (Flow point: - 20°C [-4°F]) -15°C & above [5°F & above]
JIS Special No.3 (Flow point: -30°C
[-22°F])
-25°C & above [-13°F & above]
Gasoline JIS No.2 (Flow point: -10°C [14°F]) -5°C & above [23°F & above]
Brake oil reserve
tank
Brake oil TCM Brake Fluid DOT3 Speciedoil