Technogym RUN 1000 - Cool down

13
Run 1000 - Advanced LED display
Cool down
At the end of each exercise and test there is a cooling down stage, at half the load of the exercise just completed.
The loads can be modied with the corresponding keys, like during the exercise.
The prole LED columns are blocked, showing the gradient for the exercise just ended.
Everything switches o in the goal arc; the goal dial will either show the total time of the exercise just ended, the total distance covered or the total calories burned.
The workout results alternate on the alphanumeric display:

- if the heart rate monitor has been used for at least 3 minutes during the exercise

- if the heart rate monitor has been used for at least 3 minutes during the exercise


During the cool down, the TGS key can be inserted in the reader to save the results of the exercise just ended.

This stage can be started at any time during the exercise by pressing the COOL DOWN key.
To stop the Cool down, press the STOP key.