Technogym RUN 1000 - Navy PRT Test

45
Run 1000 - Advanced LED display
The military tests
Navy PRT test
The Navy PRT test requires the user to cover 2.4 km, with gradient 1%, in the shortest possible time.
The starting speed is set by the user:

Type in the starting speed value, with the number keys, then press ENTER to conrm and proceed.
During the test the speed edit keys are enabled.

Type in the current altitude with the number keys; you are requested to specify if the test is performed at an altitude below or above 1525 metres (5000 ft) to
calculate the results.
During the cool down the results are scrolled on the alphanumeric display:

4


When the STOP key is pressed the test is cancelled, then it ends without giving any result.