UNICA EVOLUTION: Service & Maintenance Manual - rev. 1.1
3. INSTALLING AND MOVING THE
MACHINES
3.1. SPECIFICATIONS AND REQUIREMENTS
For proper installation of the equipment, make sure that:
1. The equipment is installed on a level, vibration-free surface with a sufficient capacity to support
its weight plus that of the user.
2. The area is not dusty or sandy.
3. You have observed the temperature and humidity operating requirements indicated in paragraph
2.4. “Ambient specifications”.
3.2. INSTALLATION
The machine is supplied partially disassembled, packed in three boxes which are tied together and
fixed to a wooden pallet having the dimensions given in the following drawing.
The machine installation and assembly procedures are illustrated in a CD-ROM with video clips
and photographs.
Page 3.1
To Next Page
Loading...
