Technogym Unica Evolution - Appendix; Tools to Use

UNICA EVOLUTION: Service & Maintenance Manual - rev. 1.1
11. APPENDIX
11.1. TOOLS TO USE
The following tools are necessary to carry out all disassembly, adjustment and maintenance
operations on the machines:
• 13-gauge wrench;
• 17-gauge wrench;
• 4-gauge hexagonal T-wrench;
• Torque wrench;
• Box wrenches;
• 6-mm pointed tool;
• Ring nut spanner;
• Circlip pliers;
• Hammer.
CAUTION: Tool measurements are expressed in mm.
Page 11.1