Technogym Unica Evolution - Service: Check;Set Counters

UNICA EVOLUTION: Service & Maintenance Manual - rev. 1.1
Page 10.20
10.6. SERVICE: CHECK/SET COUNTERS
To access the procedure, select the SERVICE item from the main configuration menu and enter the
password “2501” which protects against unauthorized access. Using the two center keys, enter the
value of the first digit, then press OK; repeat for the other password digits. After pressing OK to
confirm the last digit, a new menu appears:
SERVICE
MACHINE CONFIGURATION
PERIPHERALS CHECK PANEL
CHECK/SET COUNTERS
Scroll down using the center keys until the CHECK/SET COUNTERS item illuminates, then press
OK.
10.6.1. NEON LAMP ON-TIME
This item shows the usage data of the lamp in hours and minutes. The display shows:
NEON LAMP TIMEON
NEON ON HOURS
XXX:XX
The displayed values can be modified using the + and – keys. Press OK to confirm and proceed.
10.6.2. MACHINE ON-TIME
This item shows the machine usage data in hours and minutes. The display shows:
MACHINE POWER ON
MACHINE ON HOURS
XXX:XX
The displayed values can be modified using the + and – keys. Press OK to confirm and proceed.
10.6.3. NUMBER OF REPETITIONS
This item displays the total number of repetitions performed on the machine. The display shows: