Technogym Unica Evolution - Default Number of Sets; Default Recovery Time During the Exercise; Default Recovery Time During the Test

UNICA EVOLUTION: Service & Maintenance Manual - rev. 1.1
MACHINE CONFIGURATION
DEFAULT
REPS
12
Enter the desired value and press OK to confirm and proceed.
10.1.15. DEFAULT NUMBER OF SETS
This item configures the default number of sets which the machine uses during a MANUAL
TRAINING session. The display shows:
MACHINE CONFIGURATION
DEFAULT
SETS
3
Enter the desired value, then press OK to confirm and proceed.
10.1.16. DEFAULT RECOVERY TIME DURING THE EXERCISE
This item configures the default recovery time in seconds between successive sets in a MANUAL
TRAINING session. The display shows:
MACHINE CONFIGURATION
WORKOUT: REST TIME
SECS
60
Enter the desired value, then press OK to confirm and proceed.
10.1.17. DEFAULT RECOVERY TIME DURING THE TEST
This item configures the recovery time in seconds between the sets of a TEST. The display shows:
MACHINE CONFIGURATION
TEST: REST TIME
SECS
120
Enter the desired value then press OK to confirm and proceed.
Page 10.7