UNICA EVOLUTION: Service & Maintenance Manual - rev. 1.1
7. SPECIAL OPERATIONS
The term special operations refers to those procedures whose correct execution is fundamental for
the safe and reliable operation of the machine.
7.1. LOCKING DOWN THE CABLE FIXING DOWELS
The machine cables are fixed to ratchets by means of the grub screws indicated in the figure below.
The fixing dowels must be carefully locked down to prevent them from working loose and allowing
the cable to come out, causing problems to the user.
Figure 7.1-1
Use a torque wrench to ensure that the dowels are locked down with the prescribed torque of 16
Nm / 11.8 ft.lbs..
Page 7.1
To Next Page
Loading...
