Tecnoware EVO DSP PLUS MODULAR - Page 86

ENGLISH
User’s manual 80 UPS EVO DSP PLUS Modular
Step 5:
It is possible to change the STS Module, Power
Modules and Battery Modules.
It is possible to change the STS Module and Power
Modules.
11.4.2 Transfer to UPS Protection
Please follow below steps:
Power: for 80KVA~210KVA cabinet
Power: for 300KVA cabinet
Step 1:
Make sure:
• the Maintenance is complete.
• The Power Modules and STS module have
been installed well.
Make sure:
• the Maintenance is complete.
• The Power Modules and STS module have
been installed well.
Step 2:
Switch ON the Main Breaker (Q1) as shown
below.