Introduction
1–2
1720/1721
Accessories
The 1720/1721 is shipped with a set of accessories that are needed for its
installation or day-to-day operation. These are the “Standard Accessories.”
They are physically packaged in a small, cardboard carton within the packing
box.
In addition to the Standard Accessories, there are other accessory items that can
be purchased from Tektronix, Inc., which will either enhance operation or help to
customize the installation. The following list of accessories is divided into these
two categories. Part numbers for the standard accessories can be found at the
end of the Replaceable Mechanical Parts list.
1 1720/1721 Instruction Manual.
1 Power Cable Assembly.
1 Spare Cartridge Fuse (3AG 2A, 250 V, Fast Blow).
3 Replacement Scale Illumination Bulbs (Tektronix P/N 150–0168–00 or
ANSI #73).
1 Auxiliary Control Cable, for use with a 1730-Series Waveform Monitor.
1700F00, Plain Cabinet (painted silver grey)
1700F02, Portable Cabinet (painted silver grey)
1700F05, Side-by-Side Rack Adapter
1700F06, Blank Half-Rack-Width Panel
Options
Standard instruments are shipped with a P31 (green) phosphor crt installed.
Option 74 instruments are shipped with a P4 (white) phosphor crt installed.
Any of the power cord options described in Section 7 can be ordered for the
1720/1721. If no power cord option is ordered, instruments are shipped with a
North American 125 V power cord and one replacement fuse.
Standard Accessories
Optional Accessories
CRT Options
Power Cord Options
To Next Page
Loading...
Need help?
General
