Removal and Installation Procedures
CSA7404B, TDS7704B, TDS7404B, TDS7254B & TDS7154B Service Manual
6-37
4. Remove the CD Drive bracket and Rom interface board: S ee Figure 6--21, on
page 6--36.
a. Remove the four #0 Phillips screws that secure the bracket to the CD
Drive. Remove the CD Drive and Interface board from the bracket.
b. Remove the Interface board from the CD Drive by pulling the Interface
board straight back until they separate.
CD drive
interface board
#0 Phillips screw (4)
CD drive bracket
Figure 6- 22: CD drive and bracket removal
5. Reinstallation: Do in reverse steps 3 and 4 to reinstall the CD Drive
assembly.
To Next Page
Loading...
