-EC, 2460-EC, and 2461-EC Potentiostats And Galvanostats User's Manual Section 2:
077110402/November 2016 2-11
To load saved test parameters:
Test parameters can only be loaded to the same instrument model on which they were created and
saved. For example, you cannot load test parameter settings created with a 2450-EC to a 2460-EC.
1. From the Menu screen, select Load Settings.
Figure 29: Selecting Load Settings
2. Select a file by choosing File Selection and then a file number.
Figure 30: Choosing a file to load
3. Select Load Settings. You are notified when the load completes. Select OK to clear the prompt.
To Next Page
Loading...
