7: Chronopotentiometry Models 2450-EC, 2460-EC, and 2461-EC Potentiostats And Galvanostats
7-4 077110402/November 2016
Review the Menu controls
You have different options in the Menu screen, depending on the application. The following graphic
shows the Chronopotentiometry main Menu. You will learn the function for each option later in this
section.
Figure 127: Chronopotentiometry main Menu
Configure the Step and Measure Settings
Select Step Settings to specify the number, level, and duration of current steps to be sequentially
executed.
Figure 128: Step Settings menu
The Chonopotentiometry test application allows you to add up to ten steps, though such multi-step
procedures are not common. The most common protocols for Chronopotentiometry tests use a single
step.
Figure 129: Step Settings menu
To Next Page
Loading...
Need help?
General
