Tektronix KEITHLEY 2450-EC - Page 39

Models 2450
-EC, 2460-EC, and 2461-EC Potentiostats And Galvanostats User's Manual Section 3:
Open Circuit Potential
077110402/November 2016 3-5
2. Enter a value.
Now you will specify the sample interval time in seconds per point. The sample interval time is
illustrated in the next figure. You can choose an interval from 0.75 to 100 seconds per point.
Figure 51: Sample Interval time, graphic description
To specify the Sample Interval:
1. From the Measure Settings screen, select Sample Interval (s/pt).
2. Enter a value.
Figure 52: Entering the Measurement Interval