Tektronix KEITHLEY 2450-EC - Configuring Potential Pulse Settings

Models 2450
-, 2460-, & 2461-EC Potentiostats And Galvanostats User's Manual Section 4:
Potential Pulse & Square Wave
077110402/November 2016 4-5
To adjust the Base Potential:
1. From the Pulse Settings screen, select Base Potential.
2. Enter a value.
Figure 67: Entering a Base Potential
3. Select OK.
Next, you will adjust the Peak Potential. This setting allows you to adjust the maximum potential that
the instrument will attempt to force, given that the generated current is within the programmed current
limit.
To adjust the Peak Potential:
1. From the Pulse Settings screen, select Peak Potential.
2. Enter a value.
Figure 68: Entering the Peak Potential
3. Select OK.