Tektronix TG8000

HD3G7 3 Gb/s SDI Video Generator module remote commands
YCB422A_12B 1080 4:2:2 YCbCr+A 12 bits
GBR444_2K 2K 4:4:4 GBR 12 bits
XYZ444_2K 2K 4:4:4 XYZ 1
2bits
The GBR444_2K and XYZ444_2K options are only available when any 2K
format is selected by the :OUTPut1:STANdard command.
:OUTPut1:SAMPling?
Returns the sampling structure for the output test signal.
:OUTPut1:STANdard HD1080_60P| HD1080_59P|HD1080_50P|
HD1080_60I|HD1080_59I|HD10 80_50I|HD1080_30P
HD1080_29P|HD1080_25P|HD10 80_24P|HD1080_23P
HD1080_30SF|HD1080_29SF|HD 1080_25SF|
HD1080_24SF|HD1080_23SF|HD 720_60P|
HD720_59P|HD720_50P|HD720_ 30P|
HD720_29P|HD720_25P|HD720_ 24P|
HD720_23P|HD1080_24SF|HD10 80_23SF|
HD720_60P|HD720_5994P|HD72 0_50P|
HD720_30P|HD720_2997P|HD72 0_25P| HD720_24P|HD720_2398P|
TK1080_23P|TK1080_23SF|TK1 080_24P|
TK1080_24SF|TK1080_25P|TK1 080_25SF|
TK1080_29P|TK1080_29SF|TK1 080_30P| TK1080_30SF
Sets the video standard of the output signal. Arguments can be set based on
what Output Mode is set at that point. TK1080_XX arguments represent
2K video formats.
:OUTPut1:STANdard?
Returns the current video standard of the output signal.
:OUTPut1:SYNThesizer:CINEm a:PROJector <NR1> {1-54}
Sets the projector test pattern. The choices are as follows:
0 = 100% Color Bars
1 = SMPTE EG432-1 C olor Accuracy
2= Step Black-White
3= Step Black-Dark Gray
6= Black Flat Field
7= White Flat Field
8= Black-to-White 1
9= Black-to-White 2
10= Black-to-White 3
Draft
TG8000 Multiformat Test Signal Generator Programmer Manual 113