Tektronix TG8000

HD3G7 3 Gb/s SDI Video Generator module remote commands
Returns the cur
rent output mode.
:OUTPut1:MOVe:HORizontal <nu meric_value>
Sets the amount of horizontal scrolling in the moving picture m ode. You can
set the value from -252 to +252 samples.
:OUTPut1:MOVe:HORizontal?
Returns the amount of horizontal scrolling in the moving picture mode.
:OUTPut1:MOVe:VERTical <nume ric_value>
Sets the amount of vertical scrolling in the moving picture mode. You can set
the value from -252 to +252 samples.
:OUTPut1:MOVe:VERTical?
Returns the amount of vertical scrolling in the moving picture mode.
:OUTPut1:MOVe:PERiod <numeri c_value>
Sets the time interval between occurrences of the scrolling. You can set the
value from 1 to 16 frames.
:OUTPut1:MOVe:PERiod?
Returns the time interval between occurrences of the scrolling.
:OUTPut1:MOVe:RANDom[:STA Te] ON|OFF
Turns the random scrolling mode on or off. You can also use 1 or 0 instead of
ON or OFF.
:OUTPut1:MOVe:RANDom[:STA Te]?
Returns the current state of the random scrolling m ode.
:OUTPut1:SAMPling: GBR444_12B|GBR444_10B|GBR444A_10B|
YCB444_12B|YCB444_10B|YCB 444A_10B|YCB422_12B|
YCB422_10B|YCB422A_12B|GB R444_2K|XYZ444_2K
Sets the sampling structure for the output test signal. Arguments can be set
based on what Format/Output Mode is set at that point. The options are as
follows:
GBR444_12B 1080 4:4:4 GBR 12 bits
GBR444_10B 1080 4:4:4 GBR 10 bits
GBR444A_10B 1080 4:4:4 GBR+A 10 bits
YCB444_12B 1080 4:4:4 YCbCr 12 bits
YCB444_10B 1080 4:4:4 YCbCr 10 bits
YCB444A_10B 1080 4:4:4 YCbCr+A 10 bits
YCB422_12B 1080 4:2:2 YCbCr 12 bits
YCB422_10B 1080 4:2:2 YCbCr 10 bits
Draft
112 TG8000 Multiformat Test Signal Generator Programmer Manual