Tektronix TG8000

HD3G7 3 Gb/s SDI Video Generator module remote commands
Returns the cha
nnel origin ID.
:OUTPut1:EAUDio:DATA
Returns the enhanced audio group settings as a single block of data. Data
is returned in the following format (line breaks are inserted here for ease
of reading):
Gr[0]Status, Gr[0]Sampling,
Ch[0]Frq, Ch[0]Amp, Ch[0]Click, Ch[0]State, Ch[0]Origin, Ch[1]Frq,
Ch[1]Amp, Ch[1]Click, Ch[1]State, Ch[1]Origin, Ch[2]Frq, Ch[2]Amp,
Ch[2]Click, Ch[2]State, Ch[2]Origin, Ch[3]Frq, Ch[3]Amp, Ch[3]Click,
Ch[3]State, Ch[3]Origin:
Gr[1]Status, Gr[1]Sampling,
Ch[0]Frq, Ch[0]Amp, Ch[0]Click, Ch[0]State, Ch[0]Origin, Ch[1]Frq,
Ch[1]Amp, Ch[1]Click, Ch[1]State, Ch[1]Origin, Ch[2]Frq, Ch[2]Amp,
Ch[2]Click, Ch[2]State, Ch[2]Origin, Ch[3]Frq, Ch[3]Amp, Ch[3]Click,
Ch[3]State, Ch[3]Origin:
Gr[2]Status, Gr[2]Sampling,
Ch[0]Frq, Ch[0]Amp, Ch[0]Click, Ch[0]State, Ch[0]Origin, Ch[1]Frq,
Ch[1]Amp, Ch[1]Click, Ch[1]State, Ch[1]Origin, Ch[2]Frq, Ch[2]Amp,
Ch[2]Click, Ch[2]State, Ch[2]Origin, Ch[3]Frq, Ch[3]Amp, Ch[3]Click,
Ch[3]State, Ch[3]Origin:
Gr[3]Status, Gr[3]Sampling,
Ch[0]Frq, Ch[0]Amp, Ch[0]Click, Ch[0]State, Ch[0]Origin, Ch[1]Frq,
Ch[1]Amp, Ch[1]Click, Ch[1]State, Ch[1]Origin, Ch[2]Frq, Ch[2]Amp,
Ch[2]Click, Ch[2]State, Ch[2]Origin, Ch[3]Frq, Ch[3]Amp, Ch[3]Click,
Ch[3]State, Ch[3]Origin:
Each setting is separated by "," (comma). Groups are separated by ":" (colon).
:OUTPut1:MODe:MODE_3GA|MOD E_3GA_2K|MODE_3GB|MODE_3GB_2K|
MD_720_3GA|MD_2X1080_HD|MD _2X720_HD| MD_1080_HD|MD_720_HD
Sets the output mode. The options are as follows
MODE_3GA 3GA 1080 lines
MODE_3GA_2K 3GA 2K
MODE_3GB 3GB 1080 lines
MODE_3GB_2K 3GB 2K
MD_720_3GA 3GA 720 lines
MD_2X1080_HD 2xHD 1080 lines
MD_2X720_HD 2xHD 720 lines
MD_1080_HD HD 1080 lines
MD_720_HD HD 720 lines
:OUTPut1:MODe?
Draft
TG8000 Multiformat Test Signal Generator Programmer Manual 111