Tektronix TG8000

HD3G7 3 Gb/s SDI Video Generator module remote commands
Returns the sam
pling alignment status bits in the audio signal of a specific
embedded audio group for the selected outputs.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:AMPLitude
<numeric_value>
Sets the amplitude of a s pecific audio channel. The numeric value can range
from -60 dBFS to 0 dBFS in 1 dBFS steps. The [n] in the command represents
the group number. The [x] in the command represents the channel number.
You can use any channel number from 1 through 4.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:AMPLitude?
Returns the amplitude of a specific audio channel. The [n] in the command
represents the group number. The [x] in the command represents the channel
number.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:FREQuency
<numeric_value>
Sets the frequency of a spe
cific audio channel. The unit is Hertz. The choices
are 10.0 - 20000.0 in steps of 0.5, default = 1000. The <n> in the command
represents the channel number. You can use any channel number from 1
through 4.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:FREQuency?
Returns the frequency of a specific audio channel.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:CLICk 0|1|2|3|4
Sets the audio click of a specific audio channel. The choices are 1 second to
4 seconds, or off (0). When 1 to 4 is sele cted, the audio c lick becomes valid.
When audio click is valid, audio tone is turned off for 0.25 seconds around the
time of the click. The <x> in the command represents the channel number.
You can use any channel number from 1 through 4.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:CLICk
Returns the audio click status of the specified audio channel.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:MODE
ACTive|INACtive|MUTE
Sets the mode of a specific audio channel. The choices are ACT (active),
INAC (inactive), and MUTE (muted).
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]
:MODE?
Returns the mode of a specific audio channel.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:ORIGin <string>
Sets the channel origin ID of up to four ASCII characters.
:OUTPut1:EAUDio:BGROup[n] :CHANnel[x]:ORIGin?
Draft
110 TG8000 Multiformat Test Signal Generator Programmer Manual