HD3G7 3 Gb/s SDI Video Generator module remote commands
Sets the value o
f the KYSQ parameter (vertical sweep).
:OUTPut1:ZONE:KYSQ?
Returns the value of the KYSQ parameter.
:OUTPut1:ZONE:KYT
Sets the value of the KYT parameter (vertical channel vertical frequency).
:OUTPut1:ZONE:KYT?
Returns the value o f the KYT parameter.
:OUTPut1:ZONE:KT
Sets the value of the KT parameter (temporal channel frequency).
:OUTPut1:ZONE:KT?
Returns the value of the KT parameter.
:OUTPut1:ZONE:KTSQ
Sets the v alue of the KTSQ parameter (temporal sweep).
:OUTPut1:ZONE:KTSQ?
Returns the value of the KTSQ parameter.
:OUTPut1:ZONE:WAVE <SINE|SQUA Re|TRIAngle>
Sets the waveform shape.
:OUTPut1:ZONE:WAVE?
Returns the selected waveform shape.
:OUTPut1:ZONE:SAVE
Saves the current se ttings as User Custom 1 or User Custom 2.
:OUTPut1:ZONE:TRESet:STATe <0 |1>
Sets the Temporal dimension to stay constant or vary.
:OUTPut1:ZONE:TRESet:STATe ?
Returns the Temporal parameter state.
:OUTPut
1:ZONE:VIDEO:Y:STATe <0|1>
Enables or disables the Y/G/X color signal depending on the selected
sampling structure (see the:OUTPut1:SAMPling:SELect command).
:OUTPut1:ZONE:VIDEO:Y:STAT e?
Returns the state of the Y/G/X color signal.
:OUTPut1:ZONE:VIDEO:PB:STA Te <0|1>
Draft
TG8000 Multiformat Test Signal Generator Programmer Manual 121
To Next Page
Loading...
Need help?
General
