HD3G7 3 Gb/s SDI Video Generator module remote commands
:OUTPut1:ZONE
:FREQuency?
Returns the zone plate frequency.
:OUTPut1:ZONE:AMPLitude
Sets the v alue of the zone plate amplitude.
:OUTPut1:ZONE:AMPLitude?
Returns the value of the zone plate amplitude.
:OUTPut1:ZONE:K <NR1>
Sets the value of the K parameter (phase).
:OUTPut1:ZONE:K?
Returns the value of the
K parameter.
:OUTPut1:ZONE:KX
Sets the value of the KX parameter (horizontal frequency).
:OUTPut1:ZONE:KX?
Returns the value of the KX parameter.
:OUTPut1:ZONE:KXSQ
Sets the value of the KXSQ parameter (horizontal sweep).
:OUTPut1:ZONE:KXSQ?
Returns the value of the KXSQ parameter.
:OUTPut1:ZONE:KXT
Sets the value of the KXT parameter (temporal channel horizontal frequency).
:OUTPut1:ZONE:KXT?
Returns the value of the KXT parameter.
:OUTPut1:ZONE:KXY
Sets the value of the KXY parameter (vertical channel horizontal frequency).
:OUTPut1:ZONE:KXY?
Returns the value of the KXY parameter.
:OUTPut1:ZONE:KY
Sets the value of the KY p arameter (ver
tical channel frequency).
:OUTPut1:ZONE:KY?
Returns the value of the KY parameter.
:OUTPut1:ZONE:KYSQ
Draft
120 TG8000 Multiformat Test Signal Generator Programmer Manual
To Next Page
Loading...
