Tektronix TG8000 Programmer's Manual

SDI7 Dual Channel SD/HD/3G SDI Video Generator module remote commands
:OUTPut<1|2>:
EAUDio:<A|B>GROup[n]:SAMPLin g?
Returns the sampling alignment status bits for the specified embedded audio
group (1-4) of the specified virtual link (A or B).
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]:CHANnel[x]:AMPLitude <NR1>
Sets the tone amplitud
e of the specified channel (1-4) of the specified
embedded audio group (1-4) o f the specified virtual link (A or B). The
numeric value can range from -60 dBFS to 0 dBFS in 1 dBFS steps.
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]:CHANnel[x]:AMPLitude?
Returns the tone amplitude of the specified channel (1-4) of the specified
embedded audio group (1-4) of t he specified virtual link (A or B).
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]:CHANnel[x]:FREQuency <NR2>
Sets the tone frequency of the specified channel (1-4) of the specified
embedded audio group (1-4) of the specified virtual link (A or B). The numeric
value is the frequency in Hertz, between 10.0 and 20000.0 in steps of 0.5.
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]:CHANnel[x]:FREQuency?
Returns the tone frequency of the specified channel (1-4) of the specified
embedded audio group (1-4) of t he specified virtual link (A or B).
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]:CHANnel[x]:CLICk 0|1|2|3|4
Sets the audio click of the specified channel (1-4) of the specified embedded
audio group (1-4) of the specified virtual link (A or B). The choices are
1 second to 4 seconds, or off (0). When enabled, the audio click will turn the
tone off for 0.25 seconds and on for the selected duration.
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]
:CHANnel[x]:CLICk?
Returns the audio click status of the specified channel (1-4) of the specified
embedded audio group (1-4) of t he specified virtual link (A or B).
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]:CHANnel[x]:MODE
ACTive|INACtive|MUTE
Sets the mode of the specified channel (1-4) of the specified embedded audio
group (1-4) of the specified virtual link (A or B). The choices are ACT
(active), INAC (inactive), and MUTE (muted).
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]:CHANnel[x]:MODE?
Returns the mode of the specified channel (1-4) of the specified embedded
audio group (1-4) of the specified virtual link (A or B).
:OUTPut<1|2>:EAUDio:<A|B> GROup[n]:CHANnel[x]:ORIGin <string>
Sets the channel origin ID of the specified channel (1-4) of the specified
embedded audio group (1-4) of the specified virtual link (A or B). The channel
ID is a string of up to four ASCII characters.
Draft
158 TG8000 Multiformat Test Signal Generator Programmer Manual

Tektronix TG8000 Specifications

General

Brand	Tektronix
Model	TG8000
Category	Portable Generator
Language	English