Telephone port.
Used to connect to a telephone for voice service using a telephone cable, which
needs to be prepared by yourself.
WPS/Reset button.
WPS: Wi-Fi-enabled devices can connect to the Wi-Fi networks of the ONT
without entering the password through WPS negotiation.
Press the button for 1 to 3 seconds to start the WPS negotiation process of
the ONT. The 2.4G and 5G LED indicators blink quickly. Within 2 minutes,
enable the WPS function on a WPS-supported device to establish a WPS
connection.
Reset: Reset the ONT to factory settings.
After the ONT completes startup, press the button for more than 10 seconds
and release it. All LED indicators will light off in a few seconds. When the
PWR LED indicator lights solid on again, the ONT is restored to the
configurations preset by the ISP.
To Next Page
Loading...
Need help?
General
