Tenda V300 - Page 100

92
Step 2 Certificate Name: Enter the name of applied certificate.
Step 3 Certificate: Open the certified certificate with notepad (.exe), and copy the content to the box.
Step 4 Private Key: Copy the private key information which is generated when you apply the certificate to the
box.
Step 5 Click Apply.
--End
To create a new certificate, perform the following procedure:
Step 1 Click Create Certificate Request.
Step 2 Certificate Name: Specify a name for the certificate, such as mycertificate.
Step 3 Common Name: Enter the website domain name, company name or name of applier, such as
Tendacn.com, Tenda or Lucy.
Step 4 Organization Name: Enter the name of an organization/company, such as Tenda.
Step 5 State/Province Name: Enter the located state.