Tenda V300 - Iptv

96
Last Member Query
Interval (1-999)
It specifies the interval for sending query message of specified group. The default is
10. The range of the query interval is from 1 to 999. The unit is “s”.
Robustness Value
(1-999)
It specifies the robustness value of IGMP (MLD) querier. The default is 2. The range of
the query interval is from 1 to 999.
Maximum Multicast
Groups (1-32)
It specifies the maximum number of multicast group for each interface. The default is
25. The range of the query interval is from 1 to 32.
Maximum Multicast
Data Sources (for
IGMPv3: [1-24])
It specifies the maximum number of multicast data sources. The default is 10. The
range of the query interval is from 1 to 24.
Maximum Multicast
Group Members (1-32)
It specifies the maximum number of multicast group member.
Fast Leave Enable
This function is useful when you use some applications, such as IPTV, which require
changeable fast channel.
LAN to LAN (Intra LAN)
Multicast Enable
This function is useful when you want to use multicast data source of LAN as well as
IGMP (MLD) interception.
4.22 IPTV
Choose Advanced > Advanced Setup > IPTV to enter the configuration page.
To configure the IPTV function, perform the following procedure:
Step 1 Select Enable IPTV option.