Tenda V300 - Page 109

101
Step 2 Select Enabled to enable the function.
Step 3 Click Apply/Save on the bottom of this page.
Step 4 Press the WPS hardware button on the rear panel of the modem router for 3 seconds, and then release
it. (The WPS LED indicator starts blinking)
Step 5 Within 2 minutes, enable the WPS negotiation function on your wireless device.
--End
When the WPS LED turns to solid green, it indicates that the PBC negotiation is successful. The wireless device is
connected to the modem router, and the wireless network is encrypted. The SSID and password are changed to
random ones.
Option 2 Using the WPS PIN Code of the Wireless Device
Step 1 Log in to the web UI of the modem router, choose Advanced > Wireless > Security to enter the
configuration page.
Step 2 Select Enabled to enable the function.
Step 3 Click Apply/Save on the bottom of this page.
Step 4 Select Enter STA PIN.
Step 5 Enter the WPS PIN code of the wireless device in the box.
Step 6 Click Add Enrollee.