Terex Genie GTH-4017 EX - Check the Tightening of the Cardan Shaft Screws

Document 57.0009.0427
GTH-4017EX GTH-4514EX GTH-4013EX
30
Section 4 - Maintenance Procedures November 2008
TABLE B
B-5 CHECK THE TIGHTENING OF THE CARDAN
SHAFT SCREWS
Check every week that the screws of the Cardan shaft
A-B are tight.
For the correct tightening torques, please refer to par.
2.13 in section 2 “Technical Specifications”.
B
A