November 2008 Section 4 - Maintenance Procedures
TABLE A
Document 57.0009.0427
15
GTH-4017EX GTH-4514EX GTH-4013EX
A-12 GREASE THE FORKS
CAUTION
Before use grease, thoroughly clean the intervention
zone to avoid that mud, dust or other matters can
mix with the lubricant and reduce or annihilate the
lubrication effect.
Remove any old grease with a degreaser from the
telescopes before smearing them with new grease.
Smear pin A with grease to help the forks slide on it.
Recommended grease:
- AGIP graphitized grease type GR NG 3
A