Terex Genie GTH-4017 EX User Manual

Document 57.0009.0427
1
GTH-4017EX GTH-4514EX GTH-4013EX
November 2008 Section 4 - Maintenance Procedures
4.1 INTRODUCTION
• Maintenance inspections shall be completed by a
trained and qualified person on the maintenance
of this machine.
• Scheduled maintenance must be carried out at
the intervals indicated in the MAINTENANCE
REPORT.
WARNING
Failure to properly complete each inspection
when required may cause death, serious injury
or substantial machine damage.
• Immediately tag and remove from service a da-
maged or malfunctioning machine.
• Immediately tag and remove from service a da-
maged or malfunctioning machine.
• Unless otherwise specified, perform each
procedure with the machine in the following
configuration:
- machine parked on a flat level surface;
- boom in the stowed position;
- key switch in the OFF position with the key
removed.
Maintenance Procedures

Terex Genie GTH-4017 EX Specifications

General

Brand	Terex
Model	Genie GTH-4017 EX
Category	Compact Loader
Language	English