Terex Genie GTH-4017 EX - Check the Efficency of the Machine; Check the Tension of the Alternator Belt

Document 57.0009.0427
27
GTH-4017EX GTH-4514EX GTH-4013EX
November 2008 Section 4 - Maintenance Procedures
TABLE B
4.4 TABLE B PROCEDURES
B-1 CHECK THE EFFICENCY OF THE MACHINE
• Check visually the the machine is in efficient working
order.
• Make sure that all hydraulic and electrical
components are in efficient working order.
NOTICE
For the engine maintenance, please refer to the specific
Operator’s manual supplied with the machine.
B-2 CHECK THE TENSION OF THE ALTERNATOR
BELT
• Open the carter with engine cold and stopped.
• Visually check belt A for damages or cracks (this
belt doesn’t need to be tensioned as the system is
equipped with an automatic tensioning device).
• In necessary, change the belt A.
NOTICE
For the engine maintenance, please refer to the specific
Operator’s manual supplied with the machine.
A