Terex Genie GTH-4017 EX - Locking Material Recommendations

Section 2 - Technical Specification November 2008
TECHNICAL SPECIFICATION
Document 57.0009.0427
GTH-4017EX GTH-4514EX GTH-4013EX
6
2.15 LOCKING MATERIAL
THREAD LOCKERS
Product APPLICATION Characteristics Locking Resistance
Temp. °C Thread speed
Loctite 290 Thread locking to 150° M 12 Rapid Medium
Loctite 222 Thread locking to 150° M 20 Moderate Low
Loctite 243 Thread locking to 150° M 20 Rapid Medium
Loctite 262 Thread locking to 150° M 20 Moderate High
Loctite 270 Thread locking to 150° M 20 Moderate Very high
Loctite 277 Thread locking to 150° M 36 Slow High
Loctite 272 Thread locking to 200° M 36 Slow High
GASKETS Total sealing in 24-72 hours
Product APPLICATION Characteristics Formation Resistance
max Play time to fluids
°C max mm
Loctite 518 Formed-in-place gasket 150° 0,5 Moderate Excellent
Loctite 509 Formed-in-place gasket 150° 0,2 Moderate Excellent
Loctite 573 Formed-in-place gasket 150° 0,2 Slow Excellent
Loctite 574 Formed-in-place gasket 150° 0,5 Rapid Excellent
Loctite 510 Formed-in-place gasket 200° 0,2 Moderate Excellent
Loctite 5699 Formed-in-place gasket 200° 6,0 Rapid Excellent
Loctite 5999 Formed-in-place gasket 200° 6,0 Instantaneous Excellent
Loctite 5910 Formed-in-place gasket 200° 6,0 Rapid Excellent
Loctite 5900 Formed-in-place gasket 200° 6,0 Instantaneous Excellent
Loctite 5920 Formed-in-place gasket 250° M 36 Slow Good
THREAD SEALANT For hermetic sealing. Not suitable for thermoplastic materials
Product APPLICATION Characteristics Locking Disassembly
max Thread speed difficulty
°C max type
Loctite 511 Fitting sealant 150° M80 Con./Cyl. Rapid Low
Loctite 542 Fitting sealant 150° M36 Con./Cyl. Rapid Moderate
Loctite 545 Fitting sealant 150° M36 Con./Con. Moderate Low
Loctite 565 Fitting sealant 150° M80 Con./Cyl. Instantaneous Low
Loctite 572 Fitting sealant 150° M80 Con./Cyl. Moderate Low
Loctite 577 Fitting sealant 150° M80 Con./Cyl. Rapid Moderate