Terex Genie GTH-4017 EX - Check the Tightening of All Bolts and Nuts; Check the Couplings for Oil Leaks

Section 4 - Maintenance Procedures November 2008
TABLE A
Document 57.0009.0427
GTH-4017EX GTH-4514EX GTH-4013EX
6
A-3 CHECK THE TIGHTENING OF ALL BOLTS
AND NUTS
Before starting your daily work, proceed with a random
check of the bolts.
For the correct tightening torques, please refer to par.
2.13 in section 2 “Technical Specifications”.
A-4 CHECK THE COUPLINGS FOR OIL LEAKS
Before starting your work, do a walk-around inspection
and check for oil leaks.
If you find them, rectify before starting using the
machine.