Terex T780 - Page 329

1. Through the holes in the 2nd and 3rd section apply a liberal amount of multi-
purpose MPG grease to the top and bottom as shown in photo below.
2.
Use a 3" to 4" wide roller to apply the grease to the wear pad contact areas top
and bottom. See photo below
3.
Apply grease to approximately the center 12" of the floor of the 3rd section as
shown in photo below.
T300-1_T500-1_T780
Maintenance
328 P/N 12261-683
REVISED: January 2015