CIRCUIT
#
COLOR WIRE
TAG #
FUNCTION CIRCUIT
#
COLOR WIRE
TAG #
FUNCTION
12 YELLOW 4 LEFT REAR
JACK
36 RED 130 THROTTLE
SIGNAL
13 GREEN 5 RIGHT
FRONT
JACK
37 GREEN 131 THROTTLE
RETURN
14 BLUE 6 LEFT
FRONT
JACK
38 BLACK J1939+ ENGINE
COMMUNI
CATION
15 BROWN 7 REAR
RIGHT
BEAM
39 WHITE J1939 - ENGINE
COMMUNI
CATION
16 WHITE 8 LEFT REAR
BEAM
40 SHIELD SHIELD SHIFT
17 BLACK 9 RIGHT
FRONT
BEAM
41 RED 191 TRANS
SHIFT
18 RED 10 LEFT
FRONT
BEAM
42 YELLOW 102 SPARE
19 YELLOW 11 FRONT
JACK
43 GREEN 103 SPARE
20 BLUE 13 FRONT
JACK
44 YELLOW 176 TRANS
SHIFT
21 BLACK 16B GROUND 45 BLACK 143 TRANS
SHIFT
22 BLUE 20 E-STOP 46 VIOLET 192 TRANS
SHIFT
23 BROWN 21 E-STOP 47 YELLOW 194 TRANS
SHIFT
24 BLACK 23 SPARE 48 BLUE 315 SHIFT
LIGHT
NOTE: The collector ring circuits are self-cleaning and if crane has been out of
service for an long time period, by rotating the upper structure 360 degrees 10-20
times should clean off the copper brush circuits. The collector ring is not servicable
internally, thus if defective, broken terminals, brush circuits not functional, contact
your Terex Parts Department for a complete replacement collector ring.
T300-1_T500-1_T780
Service / Parts
494 P/N 12261-683
REVISED: January 2015
To Next Page
Loading...
