Texas Instruments TI-Nspire Guide Book

98 TI-Nspire™ Lab Cradle
Charging with a Charging Bay
Use the TI-Nspire™ Navigator™ Cradle Charging Bay to charge five Lab
Cradles at the same time. A full charging bay with dead Lab Cradle units
fully charges those units in less than 12 hours.
You can leave the Lab Cradle in the charging bay even if fully charged.
You can recharge at any time regardless of the current charge level.
The charging bay is only included in certain bundled packages. The
charging bay works with Lab Cradles or with Lab Cradles connected to
handhelds.
Upgrading the Operating System
Before You Begin
Before beginning an OS download, ensure that batteries are at least 25
percent charged. If attached to a handheld, remove the handheld before
updating the Lab Cradle. You cannot update the OS with the handheld
attached.
Finding Operating System Upgrades
For up-to-date information about available OS upgrades, check the Texas
Instruments website at education.ti.com.
You can download an OS upgrade from the Texas Instruments website to
a computer, and use a USB cable to install the OS on your TI-Nspire™ Lab
Cradle. You will need an Internet connection and the appropriate USB
cable to download the updates.
Checking for Lab Cradle OS Updates
When using TI-Nspire™ software, you can quickly determine if your Lab
Cradle OS is up to date when the Lab Cradle is connected to a computer.
1. Open the TI-Nspire™ software and ensure the Lab Cradle is connected
to your computer.
2. In the Documents Workspace, click to open Content Explorer.

Texas Instruments TI-Nspire Specifications

General

Type	Display
Form factor	Pocket
Product color	Blue, White
Display resolution	320 x 240 pixels
Display size (HxV) (imperial)	0 \
Compatible operating systems	Windows Vista/XP Mac OS X 10.4/10.5
Battery type	AAA
Number of batteries supported	4

Weight and Dimensions

Dimensions (WxDxH)	100 x 198.3 x 28.7 mm