Texas Instruments TI-Nspire Guide Book

20 Performing an Experiment
7. Click Experiment > Stop Collection.
The data set run is complete.
Collecting Data in the Photogate Timing Mode
Use this procedure only after you assign Photogate Timing as the
collection mode.
1. Click
Experiment > New Experiment to reset the sensor to its default
values.
This step removes any existing data and ensures the connected sensor
is set to its default values.
2. Connect a sensor.
Note: When you connect a sensor, the sensor name is added to the
sensor list.
3. Assign Photogate Timing mode as the collection mode.
4. Click
Experiment > Start Collection.
5. Collect your data set.
6. Click Experiment > Stop Collection.
The data set run is complete.
Collecting Data in the Drop Counting Mode
Use this procedure only after you assign Drop Counting as the collection
mode.
1. Click
Experiment > New Experiment to reset the sensor to its default
values.
This step removes any existing data and ensures the connected sensor
is set to its default values.
2. Connect a sensor.
Note: When you connect a sensor, the sensor name is added to the
sensor list.
3. Assign Drop Counting mode as the collection mode.
4. Click
Experiment > Start Collection.
5. Collect your data set.
6. Click
Experiment > Stop Collection.
The data set run is complete.

Texas Instruments TI-Nspire Specifications

General

Type	Display
Form factor	Pocket
Product color	Blue, White
Display resolution	320 x 240 pixels
Display size (HxV) (imperial)	0 \
Compatible operating systems	Windows Vista/XP Mac OS X 10.4/10.5
Battery type	AAA
Number of batteries supported	4

Weight and Dimensions

Dimensions (WxDxH)	100 x 198.3 x 28.7 mm